WHY USE CONTROLL® INNERSEAL?

Under normal circumstances concrete consists of five different components. These are sand, gravel, cement, water and air. The water and air in the concrete cause hardening and result in pores and capillaries forming. These pores and capillaries act as an effective transport system for water. This water causes contamination in the material, which in turn will reduce the quality of concrete.

This is where Controll® Innerseal takes effect and produces a biochemical reaction with concrete and creates new material inside the substrate. This material contains the best abilities to prevent penetration of moist, corrosion, acid attack and salt.

Controll® Innerseal was originally developed and specialized for industrial and professional use. The mixture exclusively contains components from well known suppliers with ISO-certification. The chemical recipe has been developed by experts, and all products have been tested repeatedly. View our Cerificate and Reports section to view in-depth tests and certificates authenticating Controll® Innerseal and Controll® Topseal as one of the best concrete sealers in the market.

EFFECTIVE PROBLEM SOLVER AND PREVENTIVE

The sodium silicate components within Controll® Innerseal react with the calcium hydroxide present in all concrete and as a result forms calcium silicate hydrate which fills the small pores and micro cracks to seal the concrete internally.

Air is still permitted to pass through the crystal formations avoiding water vapour to build up inside the concrete.

Economy
Controll® Innerseal is applicable both from the inside and from outside of construction. Excavation is often time consuming, comprehensive and expensive. Since Controll® Innerseal is simple to use, effective and permanent to apply, it makes it cost effective and one of the most popular concrete sealers on the marked today.
Simple and effective appliance
Concrete is treatable also when moist/wet. The appliance and use of product is so simple that anyone can do it.
Durability
Treatment with Controll® Innerseal gives a permanent protection.
Sealing
Moist penetration (capillaries) is a challenge often met concerning concrete terrace plates and foundation walls. Controll® Innerseal also has a restraining effect on the formation of mould, fungus and corrosion damage on armour inside the concrete.
Environmental
Controll® Innerseal is non-toxic, friendly to the environment and may be used everywhere, inside and outside. The product is non-toxic, non- combustible, odour-less and colourless and contains no solvents.
Strength
Controll® Innerseal has a strengthening, sealing, hardening and a dust-closing effect on all concrete products. Besides improving the concrete quality, Controll® Innerseal will also prolong and amend the effect on duration of paint.
Diffusion Open
While Controll® Innerseal allows concrete to breathe and evaporate humidity (diffusion open), the product will still stop water, oil, acids and other demolishing substances from penetrating. Even though diffusion opening is of vital significance to keep an all over satisfactory quality on concrete, this ability is not characteristic for a whole lot of the products on the market.

Warning

Although the technical details and recommendations contained in this data sheet correspond to the best of our knowledge and experience, all the above information must, in every case, be taken as merely indicative and subject to confirmation after long term practical applications; for this reason, anyone who intends to use the Inner and Topseal must ensure before used that it is suitable for the envisaged application in every case. The user alone is fully responsible for any consequences deriving from use of our products.

TESTED AROUND THE WORLD | 100% eco, deep penetrating, no VOC

Nur wenige Produkte wie Controll©Innerseal sind derartig durchleuchtet worden und haben alle Anforderungen in der Welt bestanden

European Official test by Law in all European countries CE, DIN EN 1504-2 System 2+ CE & 1504-8 Certificate for drinking water facilities UNE-DIN EN ISO 12873-2

INNERSEAL EN 1504-2, System 2+: The notified body Identification number 1111 performed the initial inspection of the manufacturing plant and of factory production control and the continuous surveillance, assessment and evaluation of factory production control under system 2+ and issued: Certificate of the yearly conformity of the factory production control 1111-CPR-0556, CE, 1504-2, System 2+ certified, 100% ECO friendly 0% VOC, certified for use with drinking water.

EN 1504-2 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete.

INNERSEAL EN 1504-2, System 2+: CE und Zertifikate Herstellung Kontrolle 1111-CPR-0556, 100% ökologisch, kein VOC, Zulassung in Verbindung mit Trinkwasser UNE-EN ISO 12873-2

Zertifizierungsstelle für die Jährliche werkseigene Produktionskontrolle: ist eine staatliche notifizierte Stelle, die die erforderliche Kompetenz und Verantwortlichkeit zur Durchführung der Zertifizierung der werkseigenen Produktionskontrolle nach den vorgegebenen Verfahrens- und Durchführungsregeln besitzt. CE und 2+ prüft sämtliche Produkte und Verfahren von Komsol und nicht nur stichweise.

1504-2 Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beurteilung der Konformität - Teil 2: Oberflächenschutzsysteme für Beton

1504 – 8 Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken in Verbindung mit Wasser - Definitionen, Anforderungen, Qualitätskontrolle und AVCP - Teil 8: Qualitätskontrolle und Bewertung und Überprüfung der Leistungsbeständigkeit (AVCP); Deutsche Fassung EN 1504-8:2016

Bitte Hier Klicken

PDF, DIN und BAST

INNERSEAL® Certificado de conformidad anual del control de producción de fábrica 1111-CPR-0556, CE, 1504-2, Sistema 2+ certificado.

100% ECOLÓGICOS 0% libre de COV (compuestos orgánicos volátiles), certificado para su uso en agua potable, EN-CE 1504-2 Sistema 2+ y 1504-8 Certificado para instalaciones de agua potable UNE-EN ISO 12873-2

EN 1504-2, Sistema 2+: El Número de identificación 1111 otorgado por organismo notificado, realiza la inspección inicial de la planta de fabricación, del control de producción de fábrica y la vigilancia y evaluación continua del control de la producción de fábrica bajo el sistema 2+ y emitido:

Certificado de conformidad anual del control de producción de fábrica 1111-CPR-0556, CE, 1504-2, Sistema 2+ certificado. Productos y sistemas para la protección y reparación de estructuras de hormigón - Definiciones, requisitos, control de calidad y evaluación de la conformidad - Parte 2: Sistemas de protección de superficies para hormigón.

PDF Importancia del Sistema 1504-2 sistema 2+