HOW TO APPLY CONTROLL® TOPSEAL?

Before use of Controll® Topseal , turn the container and shake well. The best way to apply Controll® Topseal with a regular dispersion is to use a normal sprayer. For small areas a roller, brush or a sponge can be used. To avoid the formation of puddles, the working surface has to be treated proportionality.

Normally one coat of Controll® Topseal is enough. On very damp surfaces it is recommended to use another coat.

APPLYING CONTROLL® TOPSEAL

01. - UNDERGROUND TREATMENT
The underground must be absorbent, clean, dry and free of chemical paint, varnish or other coating. Damaged joints or bigger leaks must be repaired before application. New concrete, plaster, mortar or reparation areas must be completely solid before they can be treated with Controll®Topseal. If moisture or salt problems are found then it is recommended to use a previous treatment of Controll®Innerseal ( Dry period at least 14 days).
02. - TOOLS, CLEANING
All the tools including a sprayer, brush, squidgy (floor), tuft; roller or sponge have to been cleaned immediately with water after use.
03. - TEMPERATURE TO WORK UP
Temperature to work up: 5º C – 40 ºC. Directly sun beam and a treatment on hot surface are not recommendable. The temperature must be over 5º C in the next 24 hs after application from Controll®Topseal.
04. - CONSUPTION
Approximate: 0,2 – 0,25 litter/ m2 ( = 4 – 5 m2 each litter) by double coating. Information can be change according the absorption or porosity from the underground.
05. - SUPPLY
Plastic barrel ( one way container)
2,5 litter/ 20 litter/ 1000 litter
06. - STORAGE
Store in original barrel closed and not deluded. Controll®Topseal does not have really a durability limit, but must be shaken very well before use. Frost free storage is recommended. If Controll®Topseal frosted , warm up slowly at room temperature and shake it well.
07. - PROTECTION MEASURES
During the processing use wear suitable protective clothing, gloves and eyes protectors. Controll®Topseal is a light alkaline contrite ( pH value 9 – 11). Surfaces close by the application as glass, aluminium, tiles, etc. must be covered. In case to contact with Controll®Topseal, rinse the skin or eyes immediately with much water.
08. - DISPOSAL, SAFETY, ECOLOGY
Information about safety, transportation, storage and handling with Controll® Topseal, also ecological and disposal indication can be found within a EU material safety data sheet: Please click here to view this and other certificates and reports on both Controll® Innerseal and Controll® Topseal.

Warning

Although the technical details and recommendations contained in this data sheet correspond to the best of our knowledge and experience, all the above information must, in every case, be taken as merely indicative and subject to confirmation after long term practical applications; for this reason, anyone who intends to use the Inner and Topseal must ensure before used that it is suitable for the envisaged application in every case. The user alone is fully responsible for any consequences deriving from use of our products.

TESTED AROUND THE WORLD | 100% eco, deep penetrating, no VOC

Nur wenige Produkte wie Controll©Innerseal sind derartig durchleuchtet worden und haben alle Anforderungen in der Welt bestanden

European Official test by Law in all European countries CE, DIN EN 1504-2 System 2+ CE & 1504-8 Certificate for drinking water facilities UNE-DIN EN ISO 12873-2

INNERSEAL EN 1504-2, System 2+: The notified body Identification number 1111 performed the initial inspection of the manufacturing plant and of factory production control and the continuous surveillance, assessment and evaluation of factory production control under system 2+ and issued: Certificate of the yearly conformity of the factory production control 1111-CPR-0556, CE, 1504-2, System 2+ certified, 100% ECO friendly 0% VOC, certified for use with drinking water.

EN 1504-2 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete.

INNERSEAL EN 1504-2, System 2+: CE und Zertifikate Herstellung Kontrolle 1111-CPR-0556, 100% ökologisch, kein VOC, Zulassung in Verbindung mit Trinkwasser UNE-EN ISO 12873-2

Zertifizierungsstelle für die Jährliche werkseigene Produktionskontrolle: ist eine staatliche notifizierte Stelle, die die erforderliche Kompetenz und Verantwortlichkeit zur Durchführung der Zertifizierung der werkseigenen Produktionskontrolle nach den vorgegebenen Verfahrens- und Durchführungsregeln besitzt. CE und 2+ prüft sämtliche Produkte und Verfahren von Komsol und nicht nur stichweise.

1504-2 Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beurteilung der Konformität - Teil 2: Oberflächenschutzsysteme für Beton

1504 – 8 Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken in Verbindung mit Wasser - Definitionen, Anforderungen, Qualitätskontrolle und AVCP - Teil 8: Qualitätskontrolle und Bewertung und Überprüfung der Leistungsbeständigkeit (AVCP); Deutsche Fassung EN 1504-8:2016

Bitte Hier Klicken

PDF, DIN und BAST

INNERSEAL® Certificado de conformidad anual del control de producción de fábrica 1111-CPR-0556, CE, 1504-2, Sistema 2+ certificado.

100% ECOLÓGICOS 0% libre de COV (compuestos orgánicos volátiles), certificado para su uso en agua potable, EN-CE 1504-2 Sistema 2+ y 1504-8 Certificado para instalaciones de agua potable UNE-EN ISO 12873-2

EN 1504-2, Sistema 2+: El Número de identificación 1111 otorgado por organismo notificado, realiza la inspección inicial de la planta de fabricación, del control de producción de fábrica y la vigilancia y evaluación continua del control de la producción de fábrica bajo el sistema 2+ y emitido:

Certificado de conformidad anual del control de producción de fábrica 1111-CPR-0556, CE, 1504-2, Sistema 2+ certificado. Productos y sistemas para la protección y reparación de estructuras de hormigón - Definiciones, requisitos, control de calidad y evaluación de la conformidad - Parte 2: Sistemas de protección de superficies para hormigón.

PDF Importancia del Sistema 1504-2 sistema 2+