WHY USE CONTROLL® TOPSEAL?

When you treating with Controll® Topseal, the materials become resistant against most, acid, salt, oils and grease and most stains. Here are further advantages of using Controll® Topseal:

Economy
Due the function of the product, it has become one of the most economic to protect surfaces.
Protect the surface appearance
A surface treated with Controll® Topseal will keep its natural appearance for a significant longer time.
Open to diffusion (breading)
Controll® Topseal in the same time as it penetrate the concrete it will bread and evaporate the humidity and at the same time the product prevent water leakages, oil, grease, acids and other liquid that can have an negative effect on concrete.
Environmental friendly and non toxic
Controll® Topseal is environmental friendly and can be used all over, outside ass well as inside. The product has no toxics or inflammable parts, It is odorless, colorless and contains no solvents.
Easy to use
The surface has to bee clean and dray, any cracks must be repaired before application. Surface like aluminum, crystal and ceramic must be covered up before application. Shake the product well before using it, turn the can upside-down when shaking.
Application
The product is ready to use. Be sure that the surface to be treated is clean and without old paint, oil, grease or other old coverage’s. Use low pressure spray. Prior to applying Controll® Topseal, cracks must be repaired and sealed with Control Inner Seal.
Coverage rates for Controll® Topseal depend on the porosity of the surface. Coverage can range from 2,05 – 5 m2/liter depends on the quality of the surface. The surface can not be painted after it is treated with Control® Topseal. Do not attempt a second coat after the first coat has dried as a “whiting” could occur between the two coats.
Control Top Seal penetrates and sets within two hours after application.

RECOMMENDED USE FOR

Concrete or cementitious structures, Brick and block work
Natural stone such as granite, marble and sandstone
Building facades including mosaic and tiled surfaces
Monocapa
Swimming pools
ApplicationNon-glazed tiled surfaces, such as floors, bathrooms and kitchens
Clean equipment with water
Professional products for private use

Внимание

Въпреки че техническите подробности и препоръки, съдържащи се в този информационен лист, отговарят на най-доброто от нашите знания и опит, цялата горепосочена информация трябва във всеки случай да се приема само като ориентировъчна и да подлежи на потвърждение след дългосрочни практически приложения; поради тази причина всеки, който възнамерява да използва Inner и Topseal, трябва да се увери, че преди да го използва, е подходящ за предвиденото приложение във всеки случай. Потребителят сам е изцяло отговорен за всички последици, произтичащи от използването на нашите продукти.

ИЗПИТВАНИ ПО СВЕТА

Nur wenige Produkte wie Controll©Innerseal sind derartig durchleuchtet worden und haben alle Anforderungen in der Welt bestanden

European Official test by Law in all European countries CE, DIN EN 1504-2 System 2+ CE & 1504-8 Certificate for drinking water facilities UNE-DIN EN ISO 12873-2

INNERSEAL EN 1504-2, System 2+: The notified body Identification number 1111 performed the initial inspection of the manufacturing plant and of factory production control and the continuous surveillance, assessment and evaluation of factory production control under system 2+ and issued: Certificate of the yearly conformity of the factory production control 1111-CPR-0556, CE, 1504-2, System 2+ certified, 100% ECO friendly 0% VOC, certified for use with drinking water.

EN 1504-2 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete.

INNERSEAL EN 1504-2, System 2+: CE und Zertifikate Herstellung Kontrolle 1111-CPR-0556, 100% ökologisch, kein VOC, Zulassung in Verbindung mit Trinkwasser UNE-EN ISO 12873-2

Zertifizierungsstelle für die Jährliche werkseigene Produktionskontrolle: ist eine staatliche notifizierte Stelle, die die erforderliche Kompetenz und Verantwortlichkeit zur Durchführung der Zertifizierung der werkseigenen Produktionskontrolle nach den vorgegebenen Verfahrens- und Durchführungsregeln besitzt. CE und 2+ prüft sämtliche Produkte und Verfahren von Komsol und nicht nur stichweise.

1504-2 Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beurteilung der Konformität - Teil 2: Oberflächenschutzsysteme für Beton

1504 – 8 Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken in Verbindung mit Wasser - Definitionen, Anforderungen, Qualitätskontrolle und AVCP - Teil 8: Qualitätskontrolle und Bewertung und Überprüfung der Leistungsbeständigkeit (AVCP); Deutsche Fassung EN 1504-8:2016

Bitte Hier Klicken

PDF, DIN und BAST

INNERSEAL® Certificado de conformidad anual del control de producción de fábrica 1111-CPR-0556, CE, 1504-2, Sistema 2+ certificado.

100% ECOLÓGICOS 0% libre de COV (compuestos orgánicos volátiles), certificado para su uso en agua potable, EN-CE 1504-2 Sistema 2+ y 1504-8 Certificado para instalaciones de agua potable UNE-EN ISO 12873-2

EN 1504-2, Sistema 2+: El Número de identificación 1111 otorgado por organismo notificado, realiza la inspección inicial de la planta de fabricación, del control de producción de fábrica y la vigilancia y evaluación continua del control de la producción de fábrica bajo el sistema 2+ y emitido:

Certificado de conformidad anual del control de producción de fábrica 1111-CPR-0556, CE, 1504-2, Sistema 2+ certificado. Productos y sistemas para la protección y reparación de estructuras de hormigón - Definiciones, requisitos, control de calidad y evaluación de la conformidad - Parte 2: Sistemas de protección de superficies para hormigón.

PDF Importancia del Sistema 1504-2 sistema 2+