HOW TO APPLY CONTROLL® INNERSEAL?

Below is a summary of how to apply Controll® Innerseal. For a more detailed explanation of how to apply Controll® Innerseal, view the video below or read detailed instructions in PDF format.

SURFACE
The surface must be free of dust, old paint or other incrustation that may obstruct penetration. Defect concrete/larger cracks must be professionally prepared in advance. Adjacent polished surfaces (e.g. glass, aluminium, tiles, and varnished surfaces) should be covered. Stir or shake the product.
APPLICATION
Application: If the concrete surface is very dry or the temperature is above 20° C, moisten the surfaces slightly with water, avoiding pools and flow out.
APPLICATION TOOLS
Apply Controll® Innerseal with roll, brush or low-pressure sprayer (recommended).
APPLICATION QUANTITY
Apply enough to visually confirm solid wetting of the surface, but avoid pools and flow out.
COVER RANGE
Cover range is 3-6 m2 at two applications, depending on the surface suction characteristics.
HUMIDITY
If the surface attracts abnormal amount of humidity, an additional coat may be necessary.
SEALING PROCESS
To increase and speed up the sealing process, flush with water after 12 to 24 hours.
MAXIMUN PENETRATION
To wash away possible secretion and consolidate maximum penetration, flush with water again after 48 hours.
TEMPERATURE
Further secretion may appear later; however, this is not damaging and can be flushed away if required. Do not apply Controll® Innerseal if temperature is below 5°C or above 40°C.
CLEANING TOOL
Cleaning: Tool: Water
SKIN
Water and regular soap
VENTILATION
Make sure of good ventilation and respiratory protection in sealed areas, due to mist that may irritate airways.

HOW TO APPLY CONTROLL® INNERSEAL

Внимание

Въпреки че техническите подробности и препоръки, съдържащи се в този информационен лист, отговарят на най-доброто от нашите знания и опит, цялата горепосочена информация трябва във всеки случай да се приема само като ориентировъчна и да подлежи на потвърждение след дългосрочни практически приложения; поради тази причина всеки, който възнамерява да използва Inner и Topseal, трябва да се увери, че преди да го използва, е подходящ за предвиденото приложение във всеки случай. Потребителят сам е изцяло отговорен за всички последици, произтичащи от използването на нашите продукти.

ИЗПИТВАНИ ПО СВЕТА

Nur wenige Produkte wie Controll©Innerseal sind derartig durchleuchtet worden und haben alle Anforderungen in der Welt bestanden

European Official test by Law in all European countries CE, DIN EN 1504-2 System 2+ CE & 1504-8 Certificate for drinking water facilities UNE-DIN EN ISO 12873-2

INNERSEAL EN 1504-2, System 2+: The notified body Identification number 1111 performed the initial inspection of the manufacturing plant and of factory production control and the continuous surveillance, assessment and evaluation of factory production control under system 2+ and issued: Certificate of the yearly conformity of the factory production control 1111-CPR-0556, CE, 1504-2, System 2+ certified, 100% ECO friendly 0% VOC, certified for use with drinking water.

EN 1504-2 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete.

INNERSEAL EN 1504-2, System 2+: CE und Zertifikate Herstellung Kontrolle 1111-CPR-0556, 100% ökologisch, kein VOC, Zulassung in Verbindung mit Trinkwasser UNE-EN ISO 12873-2

Zertifizierungsstelle für die Jährliche werkseigene Produktionskontrolle: ist eine staatliche notifizierte Stelle, die die erforderliche Kompetenz und Verantwortlichkeit zur Durchführung der Zertifizierung der werkseigenen Produktionskontrolle nach den vorgegebenen Verfahrens- und Durchführungsregeln besitzt. CE und 2+ prüft sämtliche Produkte und Verfahren von Komsol und nicht nur stichweise.

1504-2 Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Definitionen, Anforderungen, Qualitätsüberwachung und Beurteilung der Konformität - Teil 2: Oberflächenschutzsysteme für Beton

1504 – 8 Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken in Verbindung mit Wasser - Definitionen, Anforderungen, Qualitätskontrolle und AVCP - Teil 8: Qualitätskontrolle und Bewertung und Überprüfung der Leistungsbeständigkeit (AVCP); Deutsche Fassung EN 1504-8:2016

Bitte Hier Klicken

PDF, DIN und BAST

INNERSEAL® Certificado de conformidad anual del control de producción de fábrica 1111-CPR-0556, CE, 1504-2, Sistema 2+ certificado.

100% ECOLÓGICOS 0% libre de COV (compuestos orgánicos volátiles), certificado para su uso en agua potable, EN-CE 1504-2 Sistema 2+ y 1504-8 Certificado para instalaciones de agua potable UNE-EN ISO 12873-2

EN 1504-2, Sistema 2+: El Número de identificación 1111 otorgado por organismo notificado, realiza la inspección inicial de la planta de fabricación, del control de producción de fábrica y la vigilancia y evaluación continua del control de la producción de fábrica bajo el sistema 2+ y emitido:

Certificado de conformidad anual del control de producción de fábrica 1111-CPR-0556, CE, 1504-2, Sistema 2+ certificado. Productos y sistemas para la protección y reparación de estructuras de hormigón - Definiciones, requisitos, control de calidad y evaluación de la conformidad - Parte 2: Sistemas de protección de superficies para hormigón.

PDF Importancia del Sistema 1504-2 sistema 2+